EBSD Study of Creep‐Induced Lattice Misorientation in MgO‐Particle‐Reinforced Austenitic Steel Composites

Read full text Summarise with VIRAT
Authors: Moritz Müller, Amaya Compart, Mahnaz Mehdizadehlima, Serhii Yaroshevskyi, Christos G. Aneziris, Horst Biermann, Anja Weidner
Cited by: 0
References: 71

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Creep in compression experiments at 900°C are conducted on coarse‐grained steel‐ceramic composites reinforced with different volume fractions of recycled magnesia particles. Strain accumulation within the austenitic steel matrix is characterized through detailed electron back‐scattered diffraction (EBSD) analysis using the parameters kernel average misorientation (KAM) and grain reference orientation deviation (GROD). The creep resistance is significantly improved by increasing the volume fraction of ceramic reinforcements. Subgrain formation in the steel matrix is identified as the dominant creep mechanism. Both parameters KAM and GROD are suitable for evaluating lattice misorientation in the as‐sintered and creep‐deformed microstructures. Higher ceramic volume fractions increase the average lattice misorientation in the as‐sintered states. Under the same applied creep stress, the unreinforced steel matrix and composite variants show comparable misorientation distributions. An increase in the applied stress significantly shifts the distributions to higher misorientation values. High‐resolution electron channeling contrast imaging (ECCI) is used to confirm that KAM mapping reliably identifies subgrain structures within the steel grains. Average subgrain sizes range from 2 to 4 µm and decrease moderately with increasing creep strain. No significant differences in subgrain size are observed between the unreinforced steel and the composite variants.

Fields of Study & Subjects

High Temperature Alloys and Creep Advanced ceramic materials synthesis Microstructure and mechanical properties

Publication details

Journal / source
Advanced Engineering Materials
Volume
28
Issue
10
Publication date
22 March 2026
Language
EN