The Effect of Sintering Temperature on the Microstructure and Properties of Cr‐Al Alloys

View at publisher Summarise with VIRAT
Authors: Jianjun Yang, Ganwei Lei, Weifei Chen, Yang Yang, Caihe Fan, Zhenghua ZHOU, Wenjun Ling, Tianou Chen, Qin Wu, Zaiqi Zhang, Jin Xiao, Zaiyu Zhang
Cited by: 0
References: 12

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Cr–Al alloys have been extensively employed in related fields due to their outstanding corrosion resistance and high‐temperature properties. In this study, Cr‐Al alloys were prepared by HIP to investigate the effect of sintering temperature on their overall properties. As the temperature increased from 910°C to 950°C, the density increased from 5.32 g/cm 3 to 5.93 g/cm 3 , and the Al 3 Cr 7 and AlCr 2 phase fractions increased from 40.4% and 39.8% to 48.7% and 41.9%, respectively. Flexural strength decreased from 73 to 37 MPa, while microhardness increased from 440HV to 560HV, and the open‐circuit potential rose from −0.719 to −0.583 V. When the sintering temperature was raised to 1000°C, all properties showed little variation. Considering both performance and cost, the optimal sintering temperature for Cr‐Al alloys is 950°C.

Fields of Study & Subjects

Intermetallics and Advanced Alloy Properties Powder Metallurgy Techniques and Materials Advanced ceramic materials synthesis

Publication details

Journal / source
physica status solidi (a)
Volume
223
Issue
7
Publication date
24 March 2026
Language
EN