Experimental study on the influence of feed rate in micromilling of H13 tool steel

Read full text Summarise with VIRAT
Authors: Thaise Alonso, Milla Caroline Gomes, Márcio Bacci da Silva
Cited by: 0
References: 45

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Abstract Micromachining is a small-scale machining process that enables the manufacturing of components with high dimensional and geometric precision. However, the micromilling of hard materials like H13 tool steel is challenging due to tool wear, surface integrity issues, and burr formation. This study experimentally evaluates the influence of feed rate on micromilling slots. The experiments employed (Al, Ti) N-coated end mills with a 400 µm diameter. Cutting parameters included a constant spindle speed of 32,000 rpm, an axial depth of 40 µm, and three distinct feed per tooth values: 1, 5, and 10 µm. Key performance indicators included tool wear, surface roughness (Ra), and burr characteristics. Results indicated that Ra values remained stable, fluctuating only between 0.118 µm and 0.144 µm, a behavior linked to the minimal tool wear observed. Regarding burr formation, wave-type, feather-type, and smaller burrs were identified, with larger formations occurring on the down-milling side. Notably, spheroidal chips formed during the micromilling of H13 tool steel.

Fields of Study & Subjects

Advanced machining processes and optimization Advanced Machining and Optimization Techniques Advanced Surface Polishing Techniques

Publication details

Journal / source
The International Journal of Advanced Manufacturing Technology
Volume
143
Issue
11-12
Pages
6883–6904
Publication date
21 March 2026
Language
EN