Effects of Spray Conditions and Heat Treatments on the Physical and Mechanical Properties of Al6061 Deposits Cold-Sprayed Using N2 Gas

Read full text Summarise with VIRAT
Authors: Nirmal Dipakbhai Rajpopat, Ahmad Nourian, Turner Jennings, Aidan Sevinsky, Samuel Boese, Sinan Müftü
Cited by: 0
References: 57

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Understanding the influence of spray conditions and post-spray heat treatments on the performance of cold-sprayed materials using N 2 as the carrier gas is essential. This study examines the impact of various spray conditions and heat treatments on the physical and mechanical properties of cold-sprayed Al6061. Specimens prepared under two different spray conditions, varying the carrier gas temperature, were tested in both their as-sprayed and heat-treated states. Heat treatments, including standard and elevated temperature processes, were applied to enhance mechanical properties. Microstructural characterization was performed by assessing particle bonding quality, deformation behavior, and porosity fraction. Mechanical properties, including the yield and compression strengths, were assessed under both quasi-static compression and high-strain-rate testing at various strain rates. The physical properties, including thermal conductivity (TC), electrical conductivity (EC), and coefficient of thermal expansion (CTE), of specimens prepared under different conditions were evaluated and correlated with their mechanical properties. The results showed that the as-sprayed deposits exhibited inferior mechanical and physical properties compared to wrought Al6061. However, heat treatments improved interparticle bonding and significantly enhanced both the mechanical and physical properties, with values approaching those of wrought Al6061. Specifically, the high-temperature heat treatment performed near the solidus temperature of Al6061 resulted in properties that are closest to those of the wrought material. Statistical analysis of the results indicated strong correlations between the physical properties (TC, EC, CTE) and the compression strength, as well as among these physical properties themselves.

Fields of Study & Subjects

High-Temperature Coating Behaviors Additive Manufacturing Materials and Processes Surface Treatment and Coatings

Publication details

Journal / source
Journal of Thermal Spray Technology
Volume
35
Issue
4
Pages
1393–1412
Publication date
22 March 2026
Language
EN