Lunar regolith simulant-based triboelectric nanogenerators: Toward sustainable energy harvesting from resources on the moon

• Lunar regolith particles (LRPs) are used to develop flexible TENG composites. • LRPs/PDMS films show enhanced triboelectric output with optimized particle size. • Contact-separation TENG efficiently powers LEDs with consistent voltage output. • The approach supports sustainable, extraterrestrial, and flexible energy systems. The exploration of extraterrestrial materials for energy harvesting, generation and storage is important for futuristic material evolution and use. Thus, study and use of extraterrestrial materials simulants becomes straightforward way to identify potential of those materials. Such as Lunar Regolith Simulants are tested as reference material to explore suitability for construction, solar cell components and beyond. However, aiming futuristic space exploration, on-site energy generator development from Lunar regolith materials is unexplored and necessary to unveil it. In this work, we introduce a lightweight, flexible triboelectric nanogenerator (TENG) that uses lunar regolith simulant particles (LRPs) embedded in polydimethoxysilane (PDMS) to harvest mechanical energy as first proof-of-concept. Under cyclic contact-separation, the optimized device containing 30 wt % of ≤ 45 µm LRPs yields an open-circuit voltage V oc of ∼10.5 V, a short-circuit current I sc of ∼2.2 µA, and a peak power density reached its maximum at 3.0 µW cm⁻² under a force of 2.5 N at 10 Hz. Systematic optimization of grain size and weight fraction of LRPs in PDMS film is analyzed and resulted in the voltage output of 1.6 times and current density by 2.1 times compared to the bare PDMS material. Furthermore, the device shows 95 % performance retention of its output after 36,000 operation cycles, underscoring its good stability and potential for sustainable energy harvesting in ambient environments. These results demonstrate that utilizing extraterrestrial fillers, such as LRPs, is a useful approach for enhancing TENG performance in future terrestrial settings, offering insight for future space materials employed in composite design for TENG devices.