Experimental investigation of double-wall cooling with lattice structures for gas turbine blades

Read full text Summarise with VIRAT
Authors: Ho Seop Song, Hee Jae Lee, Hee Seung Park, Seungyeong Choi, Hee-Koo Moon, H. H. Cho
Cited by: 0
References: 27

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

This study proposes and investigates a double‐wall cooling configuration incorporating cube and tetra lattice structures. Test specimens were fabricated to match the Biot number of actual gas turbine conditions. The overall cooling effectiveness was experimentally measured under various blowing ratios (0.4, 0.6, and 0.8) using infrared thermography. In comparison to a conventional double‐wall design and double‐wall systems with pin‐fins, the lattice structure configurations exhibited superior cooling performance, achieving a maximum area‐averaged improvement of 6.45% relative to the conventional baseline at a blowing ratio of 0.6. Complementary numerical simulations were performed to explain the internal flow behavior. The results indicate that the lattice structure enhances convective heat transfer by inducing multiple impingement and reattachment flows, while also facilitating improved conduction through the interconnected structure. Furthermore, to verify the additive manufacturability, a blade with a lattice structure was fabricated via selective laser melting (SLM) using CM247LC, where computed tomography (CT) was used to inspect the internal lattice structure. Consequently, the self‐supporting lattice structure demonstrates strong potential for advanced thermal management of turbine components, offering both enhanced heat transfer capability and reduced manufacturing constraints associated with overhangs in additive manufacturing.

Fields of Study & Subjects

Turbomachinery Performance and Optimization Heat Transfer Mechanisms Heat Transfer and Optimization

Publication details

Journal / source
Case Studies in Thermal Engineering
Volume
81
Pages
108011–108011
Publication date
31 March 2026
Language
EN