New solutions based on 3-D printing for energy: Tailoring saline electrolyzers for hydrogen production

Read full text Summarise with VIRAT
Authors: Iñaki Requena, Miguel García-López, Justo Lobato, Manuel Andrés Rodrigo
Cited by: 0
References: 36

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

This work presents the design, manufacture, and evaluation of two photovoltaic-powered chlor-alkali saline electrolyzers developed for integrated hydrogen production, chlorine generation, and caustic soda formation, with potential application in renewable energy storage and CO 2 capture. The study addresses the need for compact, low-pressure electrochemical systems capable of simultaneously producing hydrogen for energy storage and hydroxide for reactive CO 2 absorption. The first device is a single-cell electrolyzer featuring 16 cm 2 perforated electrodes that enable chlorine and hydrogen generation within the same chamber. The second device scales up the concept through a three–cell electrolyzer stack, in which CO 2 fixation occurs in an external reactor. Both systems were constructed using stereolithographic 3–D printing and coupled to a gas compression unit to allow atmospheric-pressure operation while enabling compressed hydrogen storage. The single-cell prototype demonstrated suitable hydrodynamic behavior, with a mass transfer coefficient of 2.24 ± 0.78 × 10 -5 m·s −1 and high Peclet numbers, confirming convection–dominated transport. Electrical performance remained stable, with cell resistances near 1.57 Ω and power requirements between 3.5 and 16.6 W at 50–150 mA·cm −2 . Energy efficiencies reached 202 mg Cl 2 ·Wh −1 , 6.2 mg H 2 ·Wh −1 , and up to 80% faradaic efficiency for OH⁻ generation, enabling complete CO 2 capture (25 mmol) at 15 mL·min −1 . The electrolyzer stack tripled electrode area and maintained strong performance, achieving 10.8 mg H 2 ·Wh −1 and > 190 mg Cl 2 ·Wh −1 . Despite increased mechanical complexity, the stacked configuration showed improved scalability, confirming its potential as a platform for integrated hydrogen generation and CO 2 capture.

Fields of Study & Subjects

Hybrid Renewable Energy Systems Electrocatalysts for Energy Conversion Fuel Cells and Related Materials

Publication details

Journal / source
Fuel
Volume
422
Pages
139225–139225
Publication date
21 March 2026
Language
EN