Thermal behaviour of ZrCo getter beds during hydrogen absorption at variable flow rates and concentrations

Read full text Summarise with VIRAT
Authors: Nicolas Bekris, Monica Sirch, Robin Größle
Cited by: 0
References: 10

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Zirconium-cobalt alloy (ZrCo) is one of the most studied getter materials for the storage, supply, and recovery of hydrogen isotopes. However, the exothermic nature of the hydridation reaction has always raised concerns regarding local overheating, which might compromise the getter stability, particularly at high H-concentrations and/or high flow rates. In this work, the thermal behaviour of a ZrCo getter bed upon hydrogen absorption was experimentally assessed under controlled conditions in the HYDE loop facility installed at the Tritium Laboratory Karlsruhe (TLK). Successive loading–deloading cycles were performed on 30 g of ZrCo with H 2 /He mixtures ranging from 1 % to 11 % H 2 under both low (40–100 Ncm³/min) and high (300–500 Ncm³/min) H 2 flow regimes. A linear relationship (R² ≈ 0.99) was observed between the H 2 concentration in helium and the maximum temperature reached by the getter material during absorption, regardless of the helium dilution rate. The temperature increased from 68 °C at 1 % H 2 (low flow) to 258 °C at 11 % H 2 (high flow). The reproducibility of the experiments in terms of absorption capacity with nearly 40 experimental cycles also confirms that the material remains stable, with an average H/ZrCo ratio of ∼ 2.80 ± 0.06. These results show that under DEMO-relevant operating conditions (

Fields of Study & Subjects

Hydrogen Storage and Materials Fusion materials and technologies Nuclear Materials and Properties

Publication details

Journal / source
Fusion Engineering and Design
Volume
228
Pages
115739–115739
Publication date
28 March 2026
Language
EN