Effect of grain boundary types and aging precipitation in mechanical and fatigue properties of Al–Mg–Si alloy induced by extrusion and rolling processing

Read full text Summarise with VIRAT
Authors: Xinming Feng, Haochen Xu, Xiangke Wang, Hu Niu, Dongnan Huang, Zhihao Zhang
Cited by: 0
References: 47

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

This study investigates the recrystallization mechanisms of the Al-Mg-Si alloy during the plastic deformation process (extrusion or rolling) and subsequent solid solution treatment, elucidating the effect of grain boundary types and aging precipitation characteristics on mechanical and fatigue properties. The results demonstrate that extrusion processing primarily generates abundant LAGBs through DRV and DRX mechanisms within original grains, and the extruded samples (ES) retain a high fraction of subgrain boundaries (68.9%) after solid solution treatment, while the rolled samples (RS) develop fully recrystallized structures bounded by HAGBs (with a fraction of 95.9%). Under peak aged condition (180 °C for 12 h), the ES exhibit finer grain boundary precipitates (GBPs) radius (3.7 nm) and narrower precipitate-free zones (PFZs) (15 nm) along LAGBs, enhancing boundary strength and achieving superior yield strength (419 ± 6 MPa) with moderate elongation (13% ± 1.5%), while the RS show coarser GBPs (7.8 nm) and wider PFZs (29 nm) at HAGBs, resulting in lower yield strength (375 ± 3 MPa) but better plasticity (18.5% ± 0.5 %) due to weaker obstruction to dislocation slip. During the fatigue cycling process, HAGBs in the RS facilitate accelerated intergranular crack propagation, while the high-density LAGBs in the ES reduce strength mismatch between grain interiors and boundaries, promoting transgranular propagation. The mixed distribution of LAGBs and HAGBs effectively blunts crack tips, endowing the ES with enhanced fatigue crack growth resistance.

Fields of Study & Subjects

Aluminum Alloy Microstructure Properties Magnesium Alloys: Properties and Applications Fatigue and fracture mechanics

Publication details

Journal / source
Journal of Materials Research and Technology
Volume
42
Pages
1749–1760
Publication date
26 March 2026
Language
EN