Experimental studies on boosting structural and γ-ray shielding capabilities for epoxy utilizing a powder rich in ZrO2 and Y2O3
Summary
No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.
Summarise with VIRAT Free to try with your Science Catalogs account.Abstract
The current work deals with enhancing the structural, thermal, and shielding performance of epoxy resin by utilizing filler powders rich with ZrO 2 and Y 2 O 3 . The partial substitution of epoxy resin by the ZrO 2 and Y 2 O 3 increases the measured density of prepared composites from 1.14 ± 0.017 g/cm 3 to 1.270 ± 0.019 g/cm 3 when the Y + Zr concentrations rise from 0.01 wt% to 14.52 wt%, respectively. The X-ray diffraction pattern of the developed composites was analyzed to examine the influence of Zr + Y incorporation on the amorphous phase of pure epoxy. Additionally, the new functional groups that appeared within the prepared composites as a result of the incorporation of Zr + Y were detected utilizing the Fourier Transform Infrared Spectroscopy (FTIR). Furthermore, the variation in the radiation shielding properties of fabricated composites as a result of Zr + Y incorporation was measured experimentally utilizing the NaI (Tl) detector as well as utilizing the Monte Carlo simulation method. The obtained results confirm that the linear attenuation coefficient (LAC) of prepared composites enhanced from 0.517 ± 0.008 cm −1 to 1.233 ± 0.024 cm −1 at 0.059 MeV when the Zr + Y content was enriched across the concentration of 0.01-14.52 wt%, respectively.
Fields of Study & Subjects
Radiation Shielding Materials Analysis
Polymer Nanocomposite Synthesis and Irradiation
Electromagnetic wave absorption materials
Publication details
- Journal / source
- Journal of Radiation Research and Applied Sciences
- Volume
- 19
- Issue
- 2
- Pages
- 102356–102356
- Publication date
- 30 March 2026
- Language
- EN