Ultrashort pulsed (USP) laser processing of binderless nanopolycrystalline diamond (NPD)

Read full text Summarise with VIRAT
Authors: Kiran Michael, Matthias Putzer, Timo Schudeleit, Markus� Bambach, Konrad Wegener
Cited by: 0
References: 16

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Ultrashort pulsed (USP) laser machining is a promising approach for processing binderless nanopolycrystalline diamond (NPD), which combines isotropic ultra-high hardness and high thermal stability. This study systematically investigates USP laser ablation to identify suitable conditions for advanced microtool fabrication. The influence of pulse duration ( τ ), wavelength ( λ ), fluence ( F ), pulse frequency ( f ) and pulse and track overlaps ( O x , O y ) on orthogonal and quasi-tangential ablation of NPD was evaluated. The single-pulse ablation threshold ranged from 1.56 J / cm 2 for green fs irradiation to 8.82 J / cm 2 for IR ns irradiation. In orthogonal ablation, increasing f improved ablation efficiency under high-fluence conditions, with IR fs giving the highest material removal, while green fs at low frequency provided the best compromise between low roughness and high efficiency. In the overlap study, O x = 0.6 and O y = 0.8 yielded the lowest surface roughness. For quasi-tangential machining, an optimum parameter window was identified with R a = 13 nm and S a = 51 nm . Finally, NPD micro milling tools with sharp cutting edges ( r ϵ = 1.03 ± 0.13 μ m ) and low surface roughness were successfully fabricated. • Binderless nanopolycrystalline diamond showed the lowest ablation threshold under green femtosecond laser irradiation and the highest threshold under infrared nanosecond irradiation. • In orthogonal machining, green femtosecond irradiation at low frequency provided the best balance between smooth surfaces and efficient material removal, while infrared femtosecond irradiation at high frequency produced the highest removal rates. • A narrow optimum process window was identified for quasi-tangential machining, yielding very low surface roughness and high surface quality on cylindrical binderless nanopolycrystalline diamond. • Micro milling tools were successfully fabricated by combining orthogonal ablation for flute generation with quasi-tangential ablation for tool shaping, producing sharp cutting edges and low surface roughness in binderless nanopolycrystalline diamond.

Fields of Study & Subjects

Laser Material Processing Techniques Advanced Machining and Optimization Techniques Advanced Surface Polishing Techniques

Publication details

Journal / source
Materials & Design
Volume
265
Pages
115942–115942
Publication date
28 March 2026
Language
EN