Low-Cost and Tough Pneumatic Artificial Muscle (LT-PAM)

Read full text Summarise with VIRAT
Authors: Keisuke NANIWA, Yasuhiro Sugimoto, Daisuke NAKANISHI, Yoichi MASUDA
Cited by: 0
References: 13

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Pneumatic artificial muscles (PAMs) are widely used as soft actuators in biomechanics and robotics, yet their adoption in laboratories is often hindered by skill-dependent fabrication processes or reliance on costly commercial products. This article presents an open-source Low-Cost and Tough Pneumatic Artificial Muscle (LT-PAM) designed for research and educational use, with an emphasis on ease of fabrication, reproducibility, and mechanical robustness. The actuator uses a silicone inner tube, a braided sleeve, and mechanically crimped metal fittings that eliminate the need for adhesive bonding in load-bearing connections. All components are assembled from off-the-shelf parts and simple 3D-printed end plugs, enabling rapid and repeatable in-house fabrication. The basic mechanical characteristics are evaluated through quasi-static force-length tests under constant pressure and pressure-contraction tests under constant load, confirming canonical McKibben-type behavior with low sample-to-sample variability. Rupture tests and long-term cyclic tests further demonstrate robustness, with specimens sustaining tensile loads of approximately 600-800 N and surviving more than 9000 pressurization cycles without catastrophic failure. These results indicate that the LT-PAM is a practical, low-cost, and reproducible soft actuator for experiments with high-load soft robots, including musculoskeletal robotic systems.

Fields of Study & Subjects

Soft Robotics and Applications Advanced Materials and Mechanics Dielectric materials and actuators

Publication details

Journal / source
HardwareX
Volume
27
Pages
e00824–e00824
Publication date
20 August 2026
Language
EN