Ultrafast subwavelength CVD-graphene nanoheater for the generation of broadband photoacoustic waves

Efficient operation of light-to-pressure transducers and flexible fabrication on demand are key factors for the use of photoacoustic devices in various biomedical disciplines. Graphene layers can be grown at wafer scale and transferred to any surface geometry, providing a versatile approach for the development of photoacoustic emitters with a large and nearly uniform thermal interface. Here we report the picosecond excitation of a photoacoustic emitter consisting of a large-area, 10-layer graphene grown by chemical vapour deposition and encapsulated with a polydimethylsiloxane. The theoretical and experimental studies address the generation of broadband ultrasounds upon excitation with nanosecond and picosecond laser pulses, showing how the multilayer graphene can serve as an ultrafast nanoheater to drive efficient expansion of the adjacent polymer layer in the picosecond regime. The picosecond excitation results in a sharper acoustic waveform, and the pressure evolution time is twice as short with a 30 ps excitation as with a 6 ns pulse, thus satisfying the thermal and stress confinement conditions, while energy loss occurs with nanosecond excitation. We experimentally observed that the 10-layer graphene/polydimethylsiloxane generates a high-frequency photoacoustic wave with a bandwidth of about 110 MHz at −6 dB, increasing to 250 MHz at −20 dB, due to stress confinement, increased thermal interface, and ultrafast dynamics. The peak pressure of 0.85 MPa in 3.4 nm thick graphene multilayers (∼20 % absorption of 40 mJ cm –2 ) is remarkably high, demonstrating its potential as a photoacoustic material and the advantages of combining picosecond excitation with large-area graphene in wave transmission technologies.