Effect of the location of voids in solder joints on the power cycling lifetime of power semiconductor packages

Read full text Summarise with VIRAT
Authors: Hiroshi Onodera, Nobuyuki SHISHIDO, Daisuke Asari, Hiroshi Isono, Wataru Saito
Cited by: 0
References: 24

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

In power semiconductor modules, initial voids in the solder joints of chips are a factor that significantly affects power cycling lifetime. In this paper, the effects of void location and distribution were investigated through experiments and simulations. Several samples with asymmetrically arranged initial voids were artificially fabricated, and their lifetimes were evaluated through power cycling testing (PCT), while the stress in the solder joints was analyzed via simulation. As a result, even though the same bonding material was used, the relationship between power cycling lifetime and stress showed a distribution that could not be explained by the conventional Coffin-Manson law. It was confirmed that the closer the void was to the chip edge, the shorter the lifetime. Focusing on the change in stress before and after a crack reaches a void, a two-stage crack propagation model was proposed. The model assumes different crack behaviors before and after the crack reaches the void. This model successfully unified all the data for samples with different void locations. Based on these results, it is concluded that void management near the chip edge is important for improving module reliability.

Fields of Study & Subjects

Electronic Packaging and Soldering Technologies Silicon Carbide Semiconductor Technologies Welding Techniques and Residual Stresses

Publication details

Journal / source
Power Electronic Devices and Components
Volume
14
Pages
100142–100142
Publication date
24 March 2026
Language
EN