Direct numerical simulation of MILD combustion: Mixing and autoignition from non-premixed streams

Read full text Summarise with VIRAT
Authors: Lorenzo Frascino, Gandolfo Scialabba, Hongchao Chu, Heinz G. Pitsch
Cited by: 0
References: 37

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Moderate or intense low-oxygen dilution (MILD) combustion is achieved by strongly diluting and preheating the reactants through mixing with hot combustion products before ignition. To better understand how fuel/air/product mixing and interaction govern MILD combustion dynamics, a novel direct numerical simulation (DNS) dataset of a temporally evolving three-stream mixing layer consisting of fuel, air, and hot combustion products has been performed. In this configuration, both fuel–air and air–hot products mixing processes are considered with varying time scales, through four carefully designed DNS cases, to assess how their combined interaction controls ignition under MILD conditions. It is observed that the cases with higher dilution levels fall within the MILD combustion regime, whereas those with lower dilution correspond to non-MILD conditions. The results show that, as long as MILD conditions are observed, ignition is mainly driven by mixing with hot products. Flame index (FI) and local equivalence ratio ( ϕ ), combined with chemical explosive mode analysis (CEMA), further identifies the local combustion mode: in MILD cases, ignition occurs predominantly through a premixed-autoignition mode, while in non-MILD scenarios, the premixed-deflagrative contribution to the heat release rate is more substantial. Conditional analysis of scalar dissipation rates shows that the combustion modes in MILD conditions are sensitive to mixing by both the fuel and hot products, whereas the combustion modes in non-MILD conditions are mainly influenced by the mixing of the fuel with the surrounding gases. These findings indicate that MILD combustion exhibits predominantly autoignition-dominated dynamics that remain strongly coupled with multi-stream mixing, while non-MILD regimes remain characterized by stratified, flame-propagation-dominated dynamics. Novelty and significance statement : This work introduces a new DNS dataset specifically designed to investigate turbulent MILD combustion under practically relevant non-premixed inlet conditions, and, unlike previous studies, explicitly considers the coupled mixing of fuel, air, and hot products. The results demonstrate that, across all combinations of fast and slow mixing for the different streams, as long as MILD conditions are satisfied, the case exhibits premixed-autoignition-dominated characteristics. This highlights the ratio between hot products mixing time and minimum ignition delay as the governing mechanism distinguishing MILD from non-MILD behavior. The study, combining flame index and CEMA, also reveals negligible deflagrative and diffusive heat-release contributions. These datasets clarify how different mixing scenarios influence the establishment of MILD conditions, providing a practical guideline for MILD system design. Its availability is expected to support the community in the validation and development of reduced-order combustion models and to inform the design of systems operating in MILD regimes.

Fields of Study & Subjects

Combustion and flame dynamics Advanced Combustion Engine Technologies Fluid Dynamics and Turbulent Flows

Publication details

Journal / source
Proceedings of the Combustion Institute
Volume
42
Pages
106614–106614
Publication date
1 January 2026
Language
EN