Experimental study on flame and overpressure propagation characteristics of gas explosion under the suppression of loose mudstone
Summary
No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.
Summarise with VIRAT Free to try with your Science Catalogs account.Abstract
Gas explosions in coalmines usually lead to extensive damage and severe casualties. Conducting research on gas explosion suppression is of great significance for disaster reduction and prevention. In this study, experimental investigations were conducted under varying explosion intensities by using a self-designed gas explosion pipeline experimental system, systematically analyzing the suppression characteristics of loose mudstone. Results demonstrate that loose mudstone with a porosity ranging from 0.44 to 0.538 can completely block the propagation of explosion flames and shock waves under a certain blockage length-to-diameter ratio, and it can suppress an explosion overpressure of approximately 0.476 MPa. The optimal suppression condition was revealed, which the flame is quenched in a curvilinear trajectory within the mudstone voids, the downstream premixed gas was not ignited and keep the atmospheric state. Quantitative analysis reveals a power function relationship between void ratio and blockage length-diameter ratio, serving as a theoretical basis for parameter design. Notably, explosion suppression in premixed zones requires much longer blockage length compared to outside the premixed zone condition. For low-intensity explosions (Laminar flame), heat transfer dominates flame temperature reduction, while high-intensity explosions (Turbulent flame) primarily rely on active radical collision consumption. This study proposes a concept for preventing explosion propagation by loose mudstone, providing critical engineering guidance for mitigating gas explosion hazards in coal mine.
Fields of Study & Subjects
Combustion and Detonation Processes
Industrial and Mining Safety
Structural Response to Dynamic Loads
Publication details
- Journal / source
- Results in Engineering
- Volume
- 30
- Pages
- 110359–110359
- Publication date
- 2 April 2026
- Language
- EN