Evaluation of residual stress in laser-shock-peened 2024-T351 Aluminium sheet with fastener holes

Read full text Summarise with VIRAT
Authors: Niall A. Smyth, M Srinivasa Pavan, Stefano Coratella, Michael E. Fitzpatrick
Cited by: 0
References: 12

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Laser Shock Peening is a surface treatment used to increase fatigue life, resistance to stress corrosion cracking, and fretting resistance. The compressive residual stress induced at the surface inhibits crack initiation and retards propagation in components undergoing cyclic stress. In this study, peening was applied to aluminium samples representative of aircraft fuselage fastener joints as a potential alternative to cold hole expansion. Since crack initiation is preferential at locations of stress concentration such as fastener holes, only the area of the joint around the highest loaded holes was peened. The peening was performed before the drilling of the holes for fixing. The effect of the drilling process for the fastener holes on the residual stress distribution was investigated with two different techniques: incremental hole drilling, and synchrotron X-ray diffraction. Results show that, despite the residual stress relaxation and the generation of detrimental tensile residual stress in proximity of the holes due to the drilling process, these effects are mostly located in the middle of the specimen leaving compressive residual stress at the surfaces.

Fields of Study & Subjects

Surface Treatment and Residual Stress Welding Techniques and Residual Stresses Surface Treatment and Coatings

Publication details

Journal / source
Theoretical and Applied Fracture Mechanics
Volume
145
Pages
105592–105592
Publication date
30 March 2026
Language
EN