Numerical Study on MILD Combustion of a Premixed NH 3 /Air Versus CH 4 /Air Flame in a Lab-Scale Furnace

View at publisher Summarise with VIRAT
Authors: Xiangtao Liu, Jianchun Mi, Jicang Si
Cited by: 0
References: 46

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Ammonia (NH 3 ) is a sustainable, carbon-free fuel that has received worldwide attention as a potential alternative to fossil fuels. This study numerically investigates the MILD combustion characteristics of a premixed ammonia flame in a laboratory-scale furnace. The influence of inlet conditions on the combustion is systematically examined and compared with methane (CH 4 ) combustion. The investigated inlet parameters include the nozzle-exit diameter, input power, global equivalence ratio, and global oxygen concentration. The results show that the combustion temperature of NH 3 is significantly lower than that of CH 4, accompanied by a longer ignition delay and reduced flammability. Furthermore, the jet momentum rate is identified as a hybrid parameter that influences the MILD combustion characteristics of ammonia and methane very differently. For CH 4 combustion, increasing the jet momentum lowers the peak temperature and distributes heat more uniformly, thereby enhancing the MILD combustion regime. In contrast, for NH 3 combustion, typical MILD combustion is readily achieved at lower momentum rates, whereas excessively high momentum leads to reduced combustion efficiency. These divergent combustion behaviors between the two fuels cannot be attributed solely to their difference in calorific value. This paper provides a detailed analysis and discussion on the premixed MILD combustion of NH 3 /air versus CH 4 /air.

Fields of Study & Subjects

Combustion and flame dynamics Advanced Combustion Engine Technologies Coal Combustion and Slurry Processing

Publication details

Journal / source
Energy & Fuels
Volume
40
Issue
14
Pages
7770–7783
Publication date
28 March 2026
Language
EN