Simulation of Microscopic CO 2 Storage Process in Saline Aquifers Based on Three-Dimensional Pore Network Model

View at publisher Summarise with VIRAT
Authors: Chuanzhi Cui, Jing Li, Hangyu Zang, Jiqing Yi, Junkang WANG, Pan Mao, Yang Liu
Cited by: 0
References: 41

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Carbon capture, utilization, and storage (CCUS) technology is important for achieving carbon reduction. Current studies on seepage characteristics during CO 2 storage in saline aquifers focus primarily on reservoir-scale and core-scale investigations, with relatively few simulations of microscopic seepage characteristics at the pore scale. To address the above issues, in this paper, four three-dimensional pore network models of actual rock cores are established via computed tomography (CT) scanning technology. Based on microscopic numerical simulation methods coupled with multiple physical fields, the microscopic seepage process of CO 2 and water two-phase interfaces is studied to characterize the microscopic seepage characteristics of free gas, adsorbed gas, and dissolved gas. The effects of the injection velocity, wettability angle, and injection concentration on the microscopic seepage characteristics of CO 2 displacing water are analyzed. The results indicate that pore structure influences the migration direction of CO 2 . In Model 1, CO 2 preferentially migrates toward the upper and middle pore zones after injection. At the end of displacement, CO 2 primarily exists as a continuous phase, whereas water is distributed in localized clusters, blind-ended structures, and blocky formations. The average CO 2 concentration increases rapidly in the initial phase and levels off in the middle and late phases. The average CO 2 adsorption concentration increases slowly in the initial phase but nearly linearly in the middle and late phases. The average H 2 CO 3 concentration first increases but then decreases. At the same simulation time, increasing the injection velocity and concentration enhances the average CO 2 concentration within the pores, the average CO 2 adsorption concentration on the pore walls, and the average H 2 CO 3 concentration. When the water wetting angle is 135°, CO 2 exhibits stronger sweep capacity. These results are highly important for further understanding the microscopic storage mechanisms of CO 2 at the pore scale of saline aquifers at mining sites.

Fields of Study & Subjects

CO2 Sequestration and Geologic Interactions Enhanced Oil Recovery Techniques Groundwater flow and contamination studies

Publication details

Journal / source
Energy & Fuels
Volume
40
Issue
14
Pages
7580–7597
Publication date
27 March 2026
Language
EN