Calcium-Doped High-Voltage Spinel Cathode for Long Cycle Life Lithium-Ion Batteries

High Resolution Image Download MS PowerPoint Slide With the promises of low cost, high operating voltage, and excellent rate capability, the high-voltage spinel material with the formula of LiNi 0.5 Mn 1.5 O 4 (LNMO) has been considered as one of the most promising cathode materials for next-generation lithium-ion batteries (LIBs). However, the adoption of LNMO into practical LIBs is greatly hindered due to its rapid capacity decay associated with its bulk structural instability and interfacial side reactions. To address these issues, we proposed to use the cost-effective calcium (Ca) element as a dopant to stabilize the oxygen framework and surface of the LNMO crystal. The experimental results showed that, with moderate Ca doping, the obtained cathode (Ca 0.05 LNMO) retained a specific capacity of ∼121 mAh/g (∼94.4% capacity retention) after 500 cycles at 0.5 C, compared to ∼73% for the baseline bare sample. Furthermore, the Ca 0.05 LNMO cathode retained ∼84% of its initial capacity, vs the baseline with ∼69%, after 150 cycles at the high temperature of 55 °C. The excellent battery performance of the moderately Ca-doped LNMO cathode is ascribed to its structural and kinetic advantages.