Gel Metal–Organic Frameworks in Highly Concentrated Electrolyte Promote Stable Solid-Electrolyte Interface on Lithium Metal Anodes

View at publisher Summarise with VIRAT
Authors: Yuki T. Osumi, Nathan Houchens, Gregory D. Foley, Juan M. Garcia, Van Sara Thoi
Cited by: 0
References: 69

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Highly concentrated electrolytes (HCEs) have been shown to hinder dendrite formation and improve cyclability in Li-based batteries. Herein, we developed a novel strategy to use an electrolyte matrix composed of gel metal–organic frameworks (g-MOFs) and an HCE consisting of 4.5 M lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) in acetonitrile. The addition of Zr-based g-MOFs into the HCE creates a “sandy-slurry” electrolyte with higher ion conductivity and Li + transference number (i.e., g-MOF-808: σ = 16.0 mS cm –1, t Li+ = 0.800) compared to the HCE alone (σ = 8.52 mS cm –2, t Li+ = 0.511). Li-symmetric cells containing g-MOF electrolyte have stable symmetric cell cycling at high charge/discharge rates. X-ray photoelectron spectroscopy and scanning electron microscopy show that the g-MOF changes the composition of the solid-electrolyte interface of the Li electrode compared with control samples. In a series of Zr g-MOFs with varying porosity, we discovered that cells containing g-MOF-808 can be symmetrically cycled with low overpotential values compared to the control Li-symmetric cells under similar conditions. To the best of our knowledge, this study is the first to implement g-MOFs in Li-based batteries and demonstrates the potential of porous framework materials as gel electrolyte components for high-density energy storage devices.

Fields of Study & Subjects

Advanced Battery Materials and Technologies Advancements in Battery Materials Aqueous and Flow Batteries

Publication details

Journal / source
ACS Applied Materials & Interfaces
Volume
18
Issue
13
Pages
19153–19165
Publication date
30 March 2026
Language
EN