Highly Selective Recovery of Scandium over Aluminum from Sulfuric Acid Leaching Solution of Red Mud Using Ionic Liquids

Read full text Summarise with VIRAT
Authors: Xiang Su, Huipeng Liu, He Li, Yanxi Zhou, Ruibing Bai, Qiuhan Yu
Cited by: 0
References: 38

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

High Resolution Image Download MS PowerPoint Slide Extracting scandium (Sc) from red mud facilitates the comprehensive management of this solid waste, mitigating its environmental impact, while securing a sustainable supply of this critical metal. Two ionic liquids (ILs), [lauryl betaine][bis(trifluoromethanesulfonyl)imide] ([HLaur][Tf 2 N]) and [cocamidopropyl betaine][bis(trifluoromethanesulfonyl)imide] ([HCoca][Tf 2 N]) were used to separate Sc 3+ from Al 3+ in H 2 SO 4 aqueous solution. At pH 3.0, [HLaur][Tf 2 N] showed higher Sc 3+ extraction efficiency (44.4 vs 36.4%) and better selectivity over Al 3+ compared to [HCoca][Tf 2 N]. The optimal conditions for [HLaur][Tf 2 N] extraction were determined as follows: a [HLaur][Tf 2 N]-to-Sc 3+ molar ratio of 5.8:1, an extraction time of 40 min, 0.5 mol·L –1 Na 2 SO 4, and pH ≥ 3.0. The extraction process was found to follow a cation exchange mechanism involving sulfate ions. Quantitative stripping of the loaded Sc 3+ was achieved using a 0.035 mol·L –1 H 2 SO 4 solution. FT-IR analysis and recycling tests indicated that [HLaur][Tf 2 N] maintained its structural integrity over six cycles. Even in a simulated red mud leachate with high Al 3+ and low Sc 3+ concentrations, [HLaur][Tf 2 N] exhibited strong Sc 3+ selectivity, and a total extraction efficiency of 94.4% was achieved after five extraction stages, with the residual Sc 3+ concentration as low as 0.26 mg·L –1 .

Fields of Study & Subjects

Extraction and Separation Processes Bauxite Residue and Utilization Ionic liquids properties and applications

Publication details

Journal / source
ACS Omega
Volume
11
Issue
14
Pages
21722–21729
Publication date
31 March 2026
Language
EN