Compressed CO 2 -Assisted Catalytic Hydrocracking of Polyethylene over Ru-Loaded Zeolites
Summary
No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.
Summarise with VIRAT Free to try with your Science Catalogs account.Abstract
Although several chemical processes have been developed to convert waste polyolefins, their long carbon chain and high viscosity when molten result in transport-limiting kinetics. In this work, the potential of compressed CO 2 as a reaction medium was evaluated for the catalytic hydrocracking of polyethylene (PE) into hydrocarbon fuels using Ru-loaded zeolites. The results showed that the addition of compressed CO 2 (3 MPa H 2 + P CO 2 = 6 MPa) to the catalytic hydrocracking of PE led to a relative increase of 27% and 64% in PE conversion and liquid product yield, respectively, compared to the H 2 -only control reaction (3 MPa H 2 pressure) using a 5 wt % Ru/H-β catalyst at 200 °C for 4 h. Similar trends were observed with a 5 wt % Ru/H-Y catalyst. However, the presence of compressed CO 2 did not enhance the hydrocracking performance when a less viscous substrate (i.e., n -hexadecane), relative to the PE melt, was used at 200 °C for 1 h with 5 wt % Ru/H-Y. These results demonstrate the potential of compressed CO 2 as a reaction medium to enhance the chemical transformation (e.g., hydrocracking and hydrogenolysis) of highly viscous molten plastic wastes.
Fields of Study & Subjects
Zeolite Catalysis and Synthesis
Thermochemical Biomass Conversion Processes
Catalysts for Methane Reforming
Publication details
- Journal / source
- ACS Sustainable Chemistry & Engineering
- Volume
- 14
- Issue
- 14
- Pages
- 6634–6648
- Publication date
- 27 March 2026
- Language
- EN