Depth of penetration prediction in atmospheric and submerged abrasive water jet machining of Nimonic-90 using hybrid cohort intelligence modelling

Read full text Summarise with VIRAT
Authors: Dilip Maruthi G, Sudhakar C. Jambagi
Cited by: 0
References: 69

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Abstract This study investigates the influence of machining environment—atmospheric versus submerged—on the performance of Abrasive Water Jet Machining (AWJM) of Nimonic-90, focusing on depth of penetration (DOP) and surface quality. Experiments were conducted using a Taguchi L27 design considering water pressure (WP), traverse speed (TS), abrasive flow rate (AFR), and stand-off distance (SOD) as control parameters. Atmospheric machining achieved a maximum DOP of $$37.46 \pm 3.01$$ ​ mm at 275 MPa, whereas submerged machining produced smoother surfaces ( $$R_a = 1.91$$ – $$4.45\,\upmu $$ m) due to the damping effect of the surrounding water medium. TS was identified as the most influential parameter ( $$\Delta = 6.36$$ ), with an increase from 50 to 150 mm/min reducing DOP by approximately 54.6%. The optimal parameter combination for maximum DOP was WP = 275 MPa, TS = 50 mm/min, AFR = 300 g/min, and SOD = 2 mm. The Hybrid Cohort Intelligence (HCI) model incorporating polynomial regression demonstrated strong predictive capability, achieving $$R^{2} = 0.9812$$ and MSE = 1.106 for AWJM, and $$R^{2} = 0.9900$$ and MSE = 0.520 for Submerged Abrasive Water Jet Machining (SAWJM). Overall, atmospheric AWJM is suitable for higher material removal, while SAWJM provides superior surface integrity, offering a useful framework for process optimisation of Nimonic-90 within the investigated parameter range.

Fields of Study & Subjects

Erosion and Abrasive Machining Advanced Machining and Optimization Techniques Advanced machining processes and optimization

Publication details

Journal / source
Scientific Reports
Publication date
14 November 2026
Language
EN