Mechanical and Hydraulic Behavior of Highly Cemented Clay Subjected to Freeze–Thaw Cycles

View at publisher Summarise with VIRAT
Authors: Chao Liu, Claude Berard, Lijun Deng
Cited by: 0
References: 28

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Cement-treated soils or soilcrete have been used for various applications, such as railway and highway embankments, dam cores, and deep foundations for heavy superstructures. Among them, deep soil mixing (DSM) foundations supporting heavy loads in cold regions are becoming popular. However, research on the mechanical and hydraulic behavior of soilcrete subject to freeze–thaw (F/T) cycles is rare. DSM with a relatively large depth requires the engineering behavior of soilcrete under F/T cycles, including the strength under triaxial conditions and hydraulic conductivity or permeability (k). The present research was implemented to investigate the mechanical and hydraulic properties of F/T-exposed soilcrete, a mixture of Edmonton clay with a high content of ordinary portland cement (22%). Laboratory-made cylindrical specimens were subject to F/T cycles at −2°C, −5°C, and −10°C. Then, specimens were subject to isotropically consolidated undrained (ICU) triaxial tests at a confining pressure from 50 to 1,000 kPa. ICU results indicated that the cohesion of soilcrete decreased from 200 kPa to less than 50 kPa with the declining temperature, while the friction angle remained nearly unchanged at 40° after F/T cycles. The measured k of soilcrete with/without F/T cycles indicated that k increased by 25 times due to the freezing at −5°C. In contrast, the increase in k was about five times due to the number of cycles, implying that the increase in k caused by the temperature was much more noticeable than that by more F/T cycles.

Fields of Study & Subjects

Geotechnical Engineering and Soil Stabilization Geotechnical Engineering and Soil Mechanics Soil and Unsaturated Flow

Publication details

Journal / source
Journal of Cold Regions Engineering
Volume
40
Issue
2
Publication date
18 March 2026
Language
EN