Concrete with brick waste filler

View at publisher Summarise with VIRAT
Authors: Natella Eyyub Jabbarova, E. A. Najafova, Асадова Ирада Беюкага Кызы
Cited by: 0
References: 20

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

The results of studying the properties of cement and concrete based on it with the addition of broken bricks to the quality of the aggregate are presented. It has been established that as the amount of coarse fillers obtained from brick waste increases, an increase in the water-cement ratio is also observed in concrete samples. The mobility of concrete corresponds to class P1 with the amount of fillers obtained from brick chips being 50%, at 40% - P2, at 35% – class P3. An increase in water consumption is necessary to compensate for the effect of water absorption of porous fillers obtained from brick chips and to maintain the mobility of the concrete mixture. The mobility of a concrete mixture obtained from brick chips changes significantly and rapidly over time. When preparing a concrete mixture, the cone slump is 14-15 cm, after 40 minutes it decreases to 3-6 cm, and after 1 hour the mixture becomes completely solid. As the percentage of coarse fillers increases, the compressive strength also decreases. Thus, concrete samples with a percentage of fillers of 35% can be classified as class B27.5, samples with 40% - to B25, and samples with 50% – to class B22.5. It has been established that the high surface roughness of lightweight secondary aggregates from broken bricks provides good adhesion between the cement stone and the filler, and the significant deformability of the filler helps to reduce the negative impact of cement stone shrinkage on the concrete structure and prevents the appearance of shrinkage microcracks.

Fields of Study & Subjects

Recycled Aggregate Concrete Performance Materials Engineering and Processing Concrete and Cement Materials Research

Publication details

Journal / source
AIP conference proceedings
Volume
3341
Pages
020013–020013
Publication date
1 January 2026
Language
EN