Study a number of factors affecting the efficiency of removal mercurochrome dye from its aqueous solutions by electro coagulation method using aluminum electrode

View at publisher Summarise with VIRAT
Authors: Walid T. Zaben, Ahmed Saeed Othman
Cited by: 0
References: 11

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

This research included a study of a number of factors affecting the efficiency of removing the dye Mercurochrome from its aqueous solutions using electrocoagulation process. Such as the effect of changing each of (the effect of dye concentration, electrolyte concentration, different voltage and the effect of changing the distance between the electrodes). Using aluminum electrodes with dimensions of length(8cm) and width (7cm) and thickness (0.1cm) and the surface area exposed to the sintering process was (3.5 x 7.5=26.25 cm2) the electrocoagulation process was carried out in a glass cell with dimensions (10 cm, 8 cm, 6 cm) with an electrical power source (DC). The effect of changing the initial concentration was studied for four concentrations (10, 15, 20, 25 ppm) the removal rate of the dye (Removal%) was respectively (89, 91, 92, 94%) at a constant voltage (30 V) and a distance (1 cm) and a temperature (313 K) and a time (100 mهn) it is noted that higher the initial concentration of the dye, the removal efficiency increases. The effect of adding the electrolytic solution Na2SO4 was studied at concentrations (10, 15, 20, 30 ppm) and at a concentration (25 ppm) of the dye and at a temperature of (313K) and (1cm) and (30V) after (100mn) it was noted that with increasing the electrolyte concentration the removal rate decreased respectively (90, 87, 84, 80%) due to the formation of Al2(SO4)3 as it reduces the Al+3 ions released at the anode in the solution which is the basis of the sintering process that combines with the hydroxide ions formed from the electrolysis of water to form Al(OH)3. also studied effect of electrolyte NaCl in concentrations (10, 15, 20, 30ppm) and at a concentration of (25ppm) from the dye under the same conditions used in the previous electrolyte and it was noted that with increasing the electrolyte concentration the removal rate increased respectively (88, 93, 95, 97%) compared to the sodium sulfate electrolyte and it is believed that this is due to the formation of AlCl3 which increases the precipitation process. It is clear from the study of the two electrolytes that adding NaCl as an electrolyte increases the removal rate compared to not using it while the presence of Na2SO4 reduces the removal rate. The effect of changing the voltage for five different voltages (10, 15, 20, 25, 30 V) for four concentrations (10, 15, 20, 25 ppm) the removal was respectively (78, 80, 81, 83, 86%) at concentration (25 ppm) for the dye and at a distance of (2 cm) and at a temperature of (303 K) and a time of (100 mn) where the removal percentage increases with increasing voltage. Also studied the effect of changing the distance to four distances (1,2,3,4 cm) the removal rate was respectively (98, 96, 94, 89%) at a fixed concentration of (25 ppm) and at a fixed voltage of (30 V) and at a temperature of (323 K) and a time of (100 mn) it is noted from the values that the greater the distance, the lower the removal percentage. The effect of changing the temperature on the removal efficiency was studied at different temperatures (293, 303, 313, 323 K) where the percentage was Removal successively with a fixed concentration of dye (25ppm) and a distance of (1cm) and a fixed voltage (30V) for a time of (100mn) it was noted that the removal efficiency increases with increasing temperature and the best removal percentage was achieved (98) at a concentration of (25ppm) at a distance of (1cm) and a temperature of (323K) for a time of (100mn). The kinetics of the reaction were studied by studying the change in concentration with time and it was found that the removal process took a false first order through the high value of R2 (0.9961) compared to the values of R2 (0.5345) for the second order. The value of the reaction rate constant (k) was calculated at different temperatures (293, 303, 313, 323K) which were respectively (0.0071, 0.0138, 0.0213, 0.036 min-1) it is noted that (k) increases with increasing temperature. The thermodynamic variables of the activated complex were calculated activation energy (Ea=41.782 KJ.mol-1), activation entropy change (ΔS# = −0.1438KJ·K−1·mol−1) activation enthalpy change (ΔH# = 39.138KJ·mol−) and activation free energy (ΔG# = 84.838KJ·mol−1) from the negative activation entropy value indicates that the activated complex is more ordered than the reactants, and this is often the case in combination reactions. Then the equilibrium constant values (Keq) were calculated at different temperatures (293, 303, 313, 323K) and were respectively (4.924, 8.881, 17.939, 82.333) It is clear that the equilibrium constant increases with increasing temperature. From this, the thermodynamic variables were calculated, the change in enthalpy, through the Van't Hoff equation (ΔH = 71.499KJ·mol−1) a positive value indicating that the reaction is endothermic. The rate of change in free energy at different temperatures was negative, (ΔG = −3.883KJ·mol−1) indicating that the process is spontaneous. The value of the change in entropy is (ΔS = 0.255 KJ·K−1·mol−1) and the positive value indicates the presence of a random final state due to the presence of more than one phase in the solution.

Fields of Study & Subjects

Coagulation and Flocculation Studies Adsorption and biosorption for pollutant removal Electrostatics and Colloid Interactions

Publication details

Journal / source
AIP conference proceedings
Volume
3405
Pages
040010–040010
Publication date
1 January 2026
Language
EN