Analysis of thickness decline and residual life prediction of corroded sulfolane pipes in oil refineries

View at publisher Summarise with VIRAT
Authors: Muhammad Ichsanudin, Imam Prabowo, Intan Istiqomah, Muhammad Affan Arsyada, Yulia Fatmawati, Sekar Syafira Pradautami
Cited by: 0
References: 3

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

One of the supporting systems in petroleum processing activities is the sulfolan supply system. Sulfolane is essential in petroleum processing, especially in extracting aromatic compounds from crude oil. However, sulfolane is toxic and harmful to human health and corrodes structures when it reacts with oxygen. A study on the residual thickness of sulfolan pipes was conducted to determine the aggressiveness of sulfolan in corroding the pipe structure. Thickness measurements were taken using an ultrasonic thickness meter at 5 locations on the sulfolan pipe. At each point, measurements were taken four times at different angles. Based on these measurements, the minimum thickness of the sulfolan pipe is only 3.45 mm. Thickness analysis is performed using two approaches, namely fluid and structural loads. The minimum thickness required to accommodate fluid loads based on ASME standard B31.3 is 1.9 mm. While based on the structural approach based on API recommended practice 574 criteria, the minimum required thickness is 3.3 mm. Therefore, the pipe thickness is only 0.15 mm left until the material must be replaced. To obtain the residual life of the sulfolane pipe, the corrosion rate was calculated based on the minimum thickness found during the inspection. The corrosion rate was found to be 0.16 mm/year, so the life of the sulfolane pipe is only 11 months. The corrosion damage mechanisms in sulfolane pipes include uniform corrosion, corrosion under insulation, and atmospheric corrosion. Measures to replace the sulfolane pipe material must be prepared immediately to prevent structural failure as early as possible to avoid disrupting the primary process in petroleum processing activities.

Fields of Study & Subjects

Structural Integrity and Reliability Analysis Engineering Diagnostics and Reliability Material Properties and Failure Mechanisms

Publication details

Journal / source
AIP conference proceedings
Volume
3480
Pages
050039–050039
Publication date
1 January 2026
Language
EN