Optimizing sucker rod pump SPM for fluid loading in old wells

View at publisher Summarise with VIRAT
Authors: Nur Suhascaryo, Suwardi, Adi Ilcham
Cited by: 0
References: 9

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

In the world of oil and gas, especially in the production sector, the process of oil flowing from below the surface to surface production facilities is purely based on natural gush energy (natural flow). However, during its production period, sometimes a well can no longer maintain its natural gush because the reservoir energy has decreased along with the production of oil to the surface. With the decrease in reservoir energy, artificial lift is used with the aim that the well can continue to produce. In general, the artificial lift method aims to help lift fluid from the well to the surface. One type of artificial lift is the Sucker Rod Pump (SRP). The Sucker Rod Pump (SRP) is one of the most widely used artificial lifts because it has advantages including not being easily damaged, easy to repair in the field, easy to change speed, the basic technology of the nodding pump is easy to master by people in the field both in terms of and theory and it can be easily known from a distance whether the pump unit is still functioning. SRP has components that can be divided into 4 types, namely the driving engine, surface equipment, subsurface equipment, and sucker rods. The prime mover in the SRP is determined based on efficient energy requirements and other calculations. In this case, the provision of loading on the SRP support pole is important so that the effect of loading on the number of steps during the upstroke and downstroke with the power provided by the prime mover can be known. The expected results along with the many uses of nodding pumps in the field are the creation of a theory. Nodding pumps are a source of problem formulations that can be raised by academics, especially the need for a theory that can be used in learning later. The Effect of Production Fluid Loading on the Drawing Step or SPM in Nodding Pumps to be applied to Old Wells is a problem that we will raise into a theory.

Fields of Study & Subjects

Oil and Gas Production Techniques Offshore Engineering and Technologies Drilling and Well Engineering

Publication details

Journal / source
AIP conference proceedings
Volume
3480
Pages
050100–050100
Publication date
1 January 2026
Language
EN