Parametric Study of the Effect of Injection Distance in Piloted Single-Nozzle Hydrogen Lean Direct Injection (LDI) Burners

Read full text Summarise with VIRAT
Authors: Rojhat Dere, Chinonso Ezenwajiaku, Yashvir Jugduth, Nuno Rocha, Benjamin Cosway, Andrea Ducci, Ramanarayanan Balachandran, Midhat Talibi
Cited by: 0
References: 30

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

This study investigated three piloted study nozzle lean direct injection (LDI) burners, where hydrogen was injected into the main air stream in a jet-in-crossflow configuration. The aim was to understand how varying the fuel injection distance from the combustor dump plane affects the flame shape and stabilization mechanisms. To achieve this, Particle Image Velocimetry, Laser-Induced Breakdown Spectroscopy and high-speed OH* chemiluminescence were employed to analyze the flow field, fuel jet trajectory, and spatial distribution of OH*. The study examined the dynamic behavior of the flame using dynamic pressure measurements, integrated OH* data, and OH* chemiluminescence imaging. The bulk air velocity (U) of the main flame was varied between 30 m/s and 90 m/s, while the equivalence ratio ranged from 0.1 to 0.6. Three single burner injector: SB1, SB2, and SB3 were positioned at 5.4 mm, 7.65 mm, and 9 mm upstream of the injector dump plane, respectively. It was observed that the mixture fraction is dependent on the global equivalence ratio (ϕg); the position of the peak of the mixture fraction shifts from the centre of the injector towards the wall as ϕg is reduced. The turbulent kinetic energy increases significantly when the U is increased from 40 m/s to 80 m/s, thus enhancing the turbulence levels. All injectors can achieve LBO limits of ϕg \les 0.12. It is also observed that increasing the U from 40 m/s to 80 m/s reduces the NOX emissions, where higher NOX emissions observed at U = 40 m/s are attributed to the higher residence time.

Fields of Study & Subjects

Combustion and flame dynamics Fluid Dynamics and Turbulent Flows Advanced Combustion Engine Technologies

Publication details

Journal / source
Combustion Science and Technology
Volume
198
Issue
11
Pages
3592–3612
Publication date
19 March 2026
Language
EN