Taming megacast aluminium: adhesive bonding strategies for HPDC body structures

View at publisher Summarise with VIRAT
Authors: Philipp Richter, Till Vallée, Dennis Scheinert
Cited by: 0
References: 30

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Adhesive bonding of aluminium high-pressure die-cast (HPDC) AlSi10MnMg megacastings was used as a model system to explore how release-agent chemistry and downstream surface treatments together define process windows for structurally reliable joints. Rather than emphasising absolute strength values, the work focused on the mechanisms by which weak boundary layers, oxide conversion, and near-surface morphology governed the transition from adhesive to predominantly cohesive failure and the associated scatter in lap-shear strength. Plates cast with a siloxane-based release agent (S) or a wax-oil-based release agent (W) were subjected to industrially relevant routes (as-cast, solvent-cleaned, machined, T7 heat treated, Ti/Zr passivated), and their surfaces were interrogated by a combined toolbox of roughness measurements, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), infrared (IR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and laser-induced fluorescence (LIF) in conjunction with mechanical testing. In conceptual terms, S was shown to promote an inhomogeneous oxide – polysiloxan boundary layer that limited adhesion until it was chemically transformed into a mixed inorganic interphase by T7 heat treatment and Ti/Zr passivation, whereas W produced surfaces that were intrinsically bondable after simple cleaning, with chemical conversion acting mainly as stabilisation rather than as repair. The findings thus framed robust bonding on HPDC megacastings as a choice between two design strategies: compensating bond-inhibiting by targeted thermal and conversion treatments or selecting an adhesive-tolerant release agent that shifts the as-cast state directly into a cohesive, low-scatter regime and simplifies the admissible process window.

Fields of Study & Subjects

Material Properties and Applications Aluminum Alloy Microstructure Properties Advanced Welding Techniques Analysis

Publication details

Journal / source
The Journal of Adhesion
Pages
1–43
Publication date
25 March 2026
Language
EN