Effects of Two-Phase Steam-Water Flow on Terry Steam Turbine Performance
Summary
No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.
Summarise with VIRAT Free to try with your Science Catalogs account.Abstract
This paper describes an experimental investigation to explore the effects of inlet steam quality on Terry steam turbine performance. The Terry steam turbine is a single-stage, compound-velocity impulse turbine known for its low or atmospheric operating pressure, resilient performance under off-normal conditions, and minimal maintenance needs.Contrasting with a bladed steam turbine, upon entering through the steam inlet nozzle, the steam flow is redirected from being coaxial to the turbine wheel to being tangential to the wheel “buckets,” machined semi-circular volumes that are shaped into the body of the wheel. This flow path maximizes the steam impulse.Terry turbines are employed in the reactor core isolation cooling (RCIC) system in over 20 U.S. boiling water reactors with a Mark I containment design and also at the Fukushima Daiichi Nuclear Power Plant site. The RCIC system provides cooling to the reactor pressure vessel by utilizing decay heat steam to power a Terry turbine, which in turn provides power to a RCIC pump.During the Fukushima Daiichi Nuclear Power Plant accidents in 2011, the RCIC system in Units 2 and 3 functioned far beyond the RCIC system’s expected capabilities. The Terry steam turbines successfully operated under two-phase flow conditions for up to 70 h. This unexpected performance implies that the Terry turbines may have safety capabilities hitherto unknown.Given the possibility of expanded safety capabilities, the current study investigates the Terry turbine performance during two-phase steam-water ingestion. These tests serve to expand the knowledge base for the model development, validation, and verification of Terry turbine behavior in response to a beyond design-basis event, in a cost-effective manner without putting at risk a nuclear-grade full-scale Terry turbine at a nuclear power plant.Terry turbine performance is investigated experimentally over a range of turbine inlet steam qualities from 1.0 (dry steam) to 0.05 and inlet pressures of 30 to 60 psia. Turbine power output and turbine efficiency were found to be higher at higher inlet steam qualities and higher pressure. Another key finding was that the Terry turbine can continue to perform even with a very low inlet steam quality due to the bucket design.
Fields of Study & Subjects
Turbomachinery Performance and Optimization
Cavitation Phenomena in Pumps
Nuclear Engineering Thermal-Hydraulics
Publication details
- Journal / source
- Nuclear Technology
- Pages
- 1–17
- Publication date
- 30 March 2026
- Language
- EN