Comparison of Commercially Available Anion Exchange Resins for Plutonium Solution Purification
Summary
No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.
Summarise with VIRAT Free to try with your Science Catalogs account.Abstract
Four commercially available resins, Bio-Rad AG® MP-1 M, Lewatit® MonoPlus MP 500, Reillex™ 425, and Reillex™ HP were examined alongside Reillex™ HPQ, which is no longer commercially available at the time of this publication, for their ability to remove Pu(IV) from HNO3 solutions. Batch Pu(IV) distribution ratios (Kd) of the five resins were measured in 0.35 M, 3.0 M, and 8.0 M HNO3 after a 24-h contact period. Lewatit® MonoPlus MP 500, Reillex™ HP, and Reillex™ HPQ exhibited high uptake of the analyte at 8.0 M HNO3. AG® MP-1 M had a Kd > 102 in the 0.35 M HNO3 solution. The Reillex™ resins demonstrate no detectable uptake at 0.35 M HNO3, while Lewatit® MonoPlus MP 500 exhibits low uptake (Kd ca. 101) under the same conditions. Distribution ratios in 8.0 M HNO3 for Lewatit® MonoPlus MP 500, Reillex™ HP, and Reillex™ HPQ were further determined after 1-h of contact. Lewatit® MonoPlus MP 500 and Reillex™ HP had similar distribution ratios under these conditions. Finally, Reillex™ HP was directly compared against Reillex™ HPQ to determine Pu(IV) capacity. The capacity of Reillex™ HP for Pu(IV) was found to be approximately 84% of the capacity of Reillex™ HPQ, 84–87 and 101–103 g Pu/L resin, respectively.
Fields of Study & Subjects
Radioactive element chemistry and processing
Chemical Synthesis and Characterization
Extraction and Separation Processes
Publication details
- Journal / source
- Solvent Extraction and Ion Exchange
- Volume
- 44
- Issue
- 3
- Pages
- 307–322
- Publication date
- 31 March 2026
- Language
- EN