Microstructure and fatigue characteristics of AA6061-T6 joints with interlayer and cooling-assisted friction stir welding

View at publisher Summarise with VIRAT
Authors: Korra Nagu, K. Kumar, K. Vijaya Bhaskar Reddy, Koyilada Benarji, A. Varun, Mechiri Sandeep Kumar, A. Saravana Sundar, Adepu Kumar
Cited by: 0
References: 42

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

This study will investigate the impact of interlayer and cooling conditions on the microstructure, and fatigue characteristics of AA6061-T6 aluminum alloy welds produced using Friction Stir Welding (FSW). The introduction of a brass interlayer between the weld plates promotes the formation of intermetallic compounds and induces grain refinement, thereby enhancing the mechanical properties of the welds. To further improve performance, water-assisted cooling was employed as a rapid cooling approach during welding, and its effects on microstructure, intermetallic phase formation, and mechanical behavior were thoroughly assessed. Water cooling reduced the stir zone size, resulting in rapid heat extraction. EBSD and texture analysis revealed refined grains with a dominant {001}{111} orientation under water-cooled conditions. EDAX mapping confirmed reduced diffusion of Zn and Cu in water-cooled welds, which limited the formation of brittle intermetallic compounds such as Al2Cu and Al4Cu9. The water-cooled welds with an interlayer exhibited superior tensile strength and hardness, primarily due to enhanced grain refinement and the suppression of intermetallic embrittlement. Fatigue analysis demonstrated significantly improved fatigue life for the interlayer-integrated water-cooled welds, compared to natural-cooled welds. Fractographic examinations revealed ductile failure in water-cooled interlayered welds, whereas naturally cooled welds showed premature failure accompanied by voids and brittle fracture modes.

Fields of Study & Subjects

Advanced Welding Techniques Analysis Aluminum Alloy Microstructure Properties Fatigue and fracture mechanics

Publication details

Journal / source
Welding International
Pages
1–16
Publication date
26 March 2026
Language
EN