Application of oil pipe perforation gas lift drainage technology in low-pressure and low yield condensate gas wells: a case study from the XXQC Neogene condensate gas reservoir

View at publisher Summarise with VIRAT
Authors: Zidun Wang
Cited by: 0
References: 13

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

At present, the oil pipe perforation gas lift drainage technology has been widely applied and reported, but there are few reports on its application in condensate gas reservoirs developed by deep circulation gas injection. In order to broaden the application scope of oil pipe perforation gas lift drainage technology, further tap the technical potential, and propose a simple, effective, and low-cost drainage oil and gas production process technology for condensate gas reservoirs developed by deep circulation gas injection, this paper establishes gas lift start-up pressure calculation model, start-up gas injection volume calculation model, and optimal hole diameter optimization model based on the principles of mass conservation and energy conservation, and forms a calculation method for oil pipe perforation gas lift drainage characteristics. Due to the process design concept of using perforated holes instead of gas lift valves in this article, the perforation depth and hole diameter are permanently fixed and cannot be adjusted in the later stage. When designing parameters, it is necessary to focus on controlling the perforation depth and hole diameter, taking into account both gas injection efficiency and column safety. Therefore, this article establishes a parameter calculation model for oil pipe perforation gas lift holes by studying the calculation method of local resistance loss caused by hole contraction and expansion in the actual flow field of the oil pipe annulus, combined with the pressure gradient equations of single-phase flow in the annulus and multiphase flow in the oil pipe. Based on the node analysis method and the above model, a process parameter system suitable for condensate gas wells was formed, and the technical feasibility was verified through field experiments. Key technical issues such as simulation of gas-liquid three-phase flow in condensate gas wells, calculation of borehole sudden shrinkage resistance, and evaluation of tubing strength after perforation have been addressed. Based on geological parameters and production dynamics, a parameter design criterion is proposed with core parameters including tubing drilling depth, tubing drilling aperture, wellhead gas injection volume, bottom hole pressure, injection pressure, start-up pressure, daily gas production at the wellhead, and daily liquid production at the wellhead. Through on-site experiments, it was found that the production of the test well using oil pipe perforation gas lift method successfully solved the problem of abnormal production due to well bore fluid accumulation. The daily oil production level increased by 1.86 times and the daily gas production level increased by 3.95 times. The daily profit can reach 37,000 yuan, and the annual revenue can be about 12.21 million yuan. The use of oil pipe perforation gas lift can effectively reduce the operating cost of gas lift measures, which can be significantly reduced by 70% compared to the operating cost of gas lift column. The process adaptability has been effectively verified. This research achievement breaks through the limitations of traditional gas lift technology in high condensate oil and complex phase wells, providing important technical support for efficient development of deep condensate gas reservoirs, and has significant economic benefits and engineering promotion value.

Fields of Study & Subjects

Oil and Gas Production Techniques Offshore Engineering and Technologies Drilling and Well Engineering

Publication details

Journal / source
Geosystem Engineering
Pages
1–16
Publication date
26 March 2026
Language
EN