Investigation of mechanical properties and connection performance of round Sri Lankan bamboo

View at publisher Summarise with VIRAT
Authors: Sumeera Madhushan, H. A. D. Samith Buddika, S. R. W. M. I. S. Bandara, Nandana Abeysuriya, Satheeskumar Navaratnam
Cited by: 0
References: 26

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

This study investigated the compressive, flexural and shear properties of round bamboo culms of Dendrocalamus giganteus (D. giganteus) and Bambusa vulgaris (B. vulgaris) with the aim of developing strength and capacity-based structural grading. Culm diameter, wall thickness, geometry, wall density, culm density, moisture content, and linear mass are used to create strength and capacity grading. Mean compressive strength and shear strength of D. giganteus species were found to be 50.1 MPa and 9.5 MPa, respectively. Bending tests on round bamboo culms resulted in mean flexural rigidity of 23.0 kNm². Analysis showed that estimators predict compressive and flexural strength more accurately than shear strength. It was observed that the maximum load-carrying capacity of bamboo can be predicted more accurately than strength. Further, this study experimentally evaluated a full-culm bamboo–steel bolted connection under axial loading. The aim of the connection testing was to investigate the influence of transverse confinement, end distance and bolt diameter on connection performance. Introduction of transverse confinement increased ductility up to four times and effectively transformed brittle splitting failures into ductile embedment and dowel-bending failure modes. When adequate confinement and end distance were provided, the connections exhibited both improved strength and stable post-yield behaviour.

Fields of Study & Subjects

Bamboo properties and applications Structural Load-Bearing Analysis Natural Fiber Reinforced Composites

Publication details

Journal / source
Wood Material Science and Engineering
Pages
1–18
Publication date
27 March 2026
Language
EN