Development, calibration and validation of a six-component balance for rotor tests

View at publisher Summarise with VIRAT
Authors: Yongsheng Zhou, Yannian Yang
Cited by: 0
References: 39

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

As low altitude flight vehicles become increasingly popular, accurate force/moment measurements of rotors and quadcopters are significant for aerodynamic design, flight control modeling, and flight performance estimation. As loadings of rotors vary significantly depending on the drone configuration and flight condition, the balance has a customized demand on measurement range and resolution of each component. A Y-shape strain gauge balance (three beams), which is less than the popular designs with four and more beams, is designed in this research as it meets the minimum channel requirement, and also has the advantage of simplicity, compactness, and low cost. The finite element method is employed to select channels with linear relation between six-component input loadings and stress on six channels of the beams. In comparison to all channels for the least square method, the calibration by linear channels (LSL) decreases the crosstalk error from 11.82% full scale (FS) to 1.22% FS. In addition to the linearized method of LSL, the multilayer perceptron neural network (MLP) is adopted to improve the decoupling capability by considering nonlinear effects. The results demonstrate that the MLP method reduces the maximum crosstalk error from 1.22% FS to 0.55% FS in comparison to the LSL method. Validation tests on a drone rotor under hovering conditions are conducted. The results show comparable measurement uncertainty in comparison to a commercial balance, i.e. thrust and torque differences of 0.02 N (0.03% FS) and 0.03 Ncm (0.03% FS), respectively.

Fields of Study & Subjects

Aerospace and Aviation Technology Sensor Technology and Measurement Systems Aeroelasticity and Vibration Control

Publication details

Journal / source
Measurement Science and Technology
Volume
37
Issue
15
Pages
155101–155101
Publication date
10 April 2026
Language
EN