The impact of kinetic and global effects on ideal ballooning 2nd stable pedestals of conventional and low aspect-ratio tokamaks

Abstract The EPED model (Snyder et al 2011 Nucl. Fusion 51 103016) has had success in describing the pedestal structure of Type-I ELM and QH-mode plasmas in tokamaks, by combining kinetic ballooning mode (KBM) and peeling–ballooning (PB) constraints. Within EPED, the KBM constraint is often approximated by a technique using calculated ideal ballooning mode (IBM) thresholds, fit to a functional form designed to capture non-local effects. It has been noted that quantitative differences between local ideal MHD and gyro-kinetic (GK) ballooning stability can be larger at low aspect ratio. KBM critical pedestals are consistent with observations in initial studies on conventional and spherical tokamaks. In this work, the application of a reduced model for the calculation of the kinetic ballooning stability boundary is presented based on a novel and newly developed gyro-fluid system (GFS) code (Staebler et al 2023 Phys. Plasmas 30 102501). GFS is observed to capture KBMs in DIII-D as well as the NSTX pedestals, opening a route to integrating this model into EPED. Finally, high but finite n global ballooning modes are observed to limit the access to the local 2nd stability and thus provide a transport mechanism that constrains the pedestal evolution with β p , ped . The high n global ballooning stability is approximated by its ideal MHD analog using ELITE. It is shown that nearly-local high n modes with k y ρ s ∼ 0.25 − 0.5 can provide a proxy for the critical β p , ped when a 2nd stable access exists on DIII-D plasmas. The use of GFS and ELITE scaling in EPED provides improved agreement to EPED1 in an initial comparison with DIII-D pedestal data.