Environmentally Friendly Direct Regeneration of LiFePO 4 Cathodes through Lithium Carbonate and Glucose Enhancement

Read full text Summarise with VIRAT
Authors: Maira Azanuriska, Eka Galuh Mustika Bulan Dari, Cici Citria Sahara, Ihsanul Mubarok, Sahrul Hidayat
Cited by: 0
References: 23

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Abstract The rising adoption of electric vehicles has led to a significant increase in lithium-ion battery waste, particularly from lithium iron phosphate (LiFePO 4 or LFP) batteries. Traditional recycling techniques such as pyrometallurgy and hydrometallurgy are often inefficient for LFP due to their high energy requirements and complex processing steps. This study proposes a direct regeneration method to recover the active LFP cathode material (S-LFP) from spent batteries using a thermal treatment approach. The regeneration process includes initial heating in a nitrogen atmosphere to eliminate organic binders, followed by the addition of lithium carbonate (Li 2 CO 3 ) and glucose (C 6 H 12 O 6 ), and subsequent calcination in an argon environment to restore the crystal structure. Three samples were analyzed using XRD, XRF, and SEM-EDS: Sample A (prior to thermal treatment), Sample B (post nitrogen heating), and Sample C (after additive treatment and calcination). XRD shows nitrogen heating succeeded increasing LiFePO 4 to 78.1%, while regeneration process produces secondary phase and crystallinity decreased. XRF analysis showed a reduction in iron (Fe) content from 60.84% in Sample A to 59.34% in Sample B, and further to 40.47% in Sample C, suggesting partial reduction of Fe 3+ that may enhance the electronic conductivity of the cathode. Phosphorus (P) content increased from 33.94% in Sample A to 36.23% in Sample B and 38.26% in Sample C, indicating improved stability of the phosphate (PO 4 3− ) groups, which supports the reformation of the olivine-type crystal structure in LiFePO 4 . SEM analysis shows thermal treatment succeeded remove the organic residues, while leads to agglomeration in sample C. EDS confirmed a significant increase in carbon content due to glucose carbonization, which contributes to improved charge transfer at the interface and reduced internal resistance.

Fields of Study & Subjects

Extraction and Separation Processes Advancements in Battery Materials Battery Modeling and Management

Publication details

Journal / source
Journal of Physics Conference Series
Volume
3187
Issue
1
Pages
012005–012005
Publication date
1 March 2026
Language
EN