Study on the corrosion behavior of several alloys in the ternary nitrate-carbonate mixed salt

Read full text Summarise with VIRAT
Authors: Qi Gao, Ankang Dai, Hailong Huo, Zifeng Sui, Dapeng Zhang, Xinlong Han, Xudong Ma, Yuanwei Lu
Cited by: 0
References: 4

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Abstract As solar thermal power generation technology advances toward ultra-supercritical conditions, the operating temperature range of its heat storage media must exceed 600 °C. With its decomposition temperature reaching 688 °C, the ternary nitrate-carbonate mixed salt exhibits tremendous potential for application in solar thermal power generation. However, its compatibility limitations with the metal materials of this molten salt constrain its practical implementation. This study employed the weight loss method to investigate the corrosion behavior of three alloy materials in the ternary nitrate-carbonate mixed salt. Experimental results showed corrosion rates of 0.1473 mm/y, 0.0881 mm/y, and 0.0877 mm/y for 321 H, 347 H, and Inconel 625, respectively, after 1000 hours. Microscopic examination revealed a loose oxide layer with discontinuities on the 321 H surface, while 347 H and Inconel 625 exhibited dense and relatively intact oxide films. These results indicate superior compatibility of 347 H and Inconel 625 in the ternary nitrate-carbonate mixed salt at corresponding temperatures.

Fields of Study & Subjects

Molten salt chemistry and electrochemical processes High-Temperature Coating Behaviors Phase Change Materials Research

Publication details

Journal / source
Journal of Physics Conference Series
Volume
3198
Issue
1
Pages
012048–012048
Publication date
1 March 2026
Language
EN