Crack propagation test and parameter influence analysis of ultra-high pressure wellhead gas tree

Read full text Summarise with VIRAT
Authors: Xuwu Luo, Shaobo Feng, Xiangjuan Meng, Kun Hunag, Zhixiong Tu, Junhui Wei, Bao Zhang, Yinglin Zhang
Cited by: 0
References: 24

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Abstract To effectively improve the service life of the 175MPa high-pressure wellhead gas tree in the 10000-meter-deep well of Tarim Oilfield, the standard compact tensile specimens were prepared using on-site gas tree materials, and pre corrosion liquids were prepared using on-site formation water composition. High strength and high-pressure wellhead gas tree materials were subjected to fatigue corrosion crack propagation tests using MTS electro-hydraulic servo tension torsion fatigue machine. The influence of stress ratio, loading frequency, and corrosion liquid density on the crack propagation life of gas tree materials was explored. The surface morphology of the crack propagation zone was analyzed using environmental scanning electron microscopy and X-ray energy spectrometer. It was found that, firstly, when the external load stress ratio increases, the fatigue crack propagation rate of the gas tree increases, but the range of stress intensity factors decreases, ultimately leading to an increase in fatigue life. Secondly, the fatigue crack propagation rate of gas trees is closely related to the loading frequency in corrosive environments. When materials are subjected to external alternating stress under the action of corrosive environmental water, the higher the loading frequency, the faster the crack propagation rate of gas trees, and the shorter the fatigue life. Thirdly, when the tubing string was in low density completion fluid, the crack propagation rate of gas trees slows down and their fatigue life increases, while high-density corrosive fluids accelerate the crack propagation rate. Therefore, in the operation on-site, controlling the load stress ratio of the gas tree within the range of 0.2∼0.25, adjusting the vibration frequency of the gas tree within 0.6 Hz∼0.9 Hz, and appropriately reducing the density of the corrosive solution (controlled between 1100 kg/m3∼1150 kg/m3) can effectively improve the fatigue life of the high-pressure wellhead gas tree.

Fields of Study & Subjects

Fatigue and fracture mechanics Hydrogen embrittlement and corrosion behaviors in metals Material Properties and Failure Mechanisms

Publication details

Journal / source
Journal of Physics Conference Series
Volume
3202
Issue
1
Pages
012007–012007
Publication date
1 March 2026
Language
EN