Modification of corrosion resistance of aluminum alloys

Read full text Summarise with VIRAT
Authors: Yutong Liu
Cited by: 0
References: 12

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Abstract Aluminum alloys exhibit broad application potential in aviation, automotive, and electronics fields due to their excellent comprehensive properties. Particularly in the harsh aviation service environment, higher performance requirements are imposed on aluminum alloy materials. However, the inherent chemical activity of aluminum alloys makes them prone to forming a natural oxide film in dry air. This oxide film not only has limited corrosion resistance but also suffers from inherent defects such as low hardness and poor wear resistance. To effectively overcome the shortcomings of aluminum alloy surface properties, surface treatment technology is crucial for solving or enhancing its application performance. Therefore, this study focuses on the electroless nickel composite coating technology, a surface strengthening process for aluminum alloys, systematically investigating its improvement effect on aluminum alloy surface properties. The immersion zinc process, a key step in enhancing coating-substrate bonding strength during the electroless nickel pre-treatment stage, was specifically examined, where precise control of its process parameters is decisive. This study characterized the surface morphology of the zinc immersion layer through microscopic observation and evaluated coating bonding strength using scratch and bending test methods. The research results indicate that the zinc immersion process is a reliable guarantee for obtaining excellent coating bonding strength. Specifically, the electroless nickel layer obtained using a double zinc immersion process (first immersion 60 s, second immersion 30 s) at room temperature (20-25°C) exhibited outstanding bonding performance: the critical load measured by scratch test reached 81.2 N, and no peeling or spalling occurred after the bending test.

Fields of Study & Subjects

Electrodeposition and Electroless Coatings Corrosion Behavior and Inhibition Surface Treatment and Coatings

Publication details

Journal / source
Journal of Physics Conference Series
Volume
3202
Issue
1
Pages
012030–012030
Publication date
1 March 2026
Language
EN