A study of the surface morphology and mechanical property of top-hat fiber laser micropolishing 718H die steel

Read full text Summarise with VIRAT
Authors: Wanshou Sun, Haibing Xiao, Kai Zhou, Mingjun Liu, Xiaomei Xu, Bowei Luo, Yingwei Kuang, Lunmu Wang
Cited by: 0
References: 13

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Abstract In order to improve the precision of laser micropolishing of 718H die steel, a new method of fiber laser micropolishing for 718H die steel used by top-hat laser beam was proposed. The surface morphology and mechanical properties of 718H die steel with top-hat laser micropolishing were studied. The multi-factor test was used to study the influence law of laser power, scanning speed and defocusing amount on the polishing effect of 718H die steel. The energy distribution from a top-hat laser output is evenly distributed. The top-hat laser output energy distribution is even, which reduces the production of polishing defects and greatly reduced the surface roughness. The results showed that original roughness of 718H die steel Sa2.91μm decreased to 0.33μm by top-hat laser polishing. Furthermore, TEM tester, EBSD analysis were used to characterize properties of 718H die steel after top-hat laser polishing, the crystal structure is mainly columnar in polishing layer. Through friction and wear testing, the 718H die steel surface quality has greatly improved used by top-hat laser polishing. The friction coefficient of the 718H die steel surface, is reduced from 0.9 to about 0.76 under the loading lasts for 3 minutes.

Fields of Study & Subjects

Laser Material Processing Techniques Advanced Surface Polishing Techniques Advanced Machining and Optimization Techniques

Publication details

Journal / source
Journal of Physics Conference Series
Volume
3202
Issue
1
Pages
012054–012054
Publication date
1 March 2026
Language
EN