Numerical simulation of the combined expansion and reduction process for copper tubes

Read full text Summarise with VIRAT
Authors: Senliang Ye, Dewen Sun, Yuxuan Wang
Cited by: 0
References: 6

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Abstract This paper employs the finite element method to establish a material model for the numerical simulation of the forming process. The feasibility of combining expansion and reduction in the drawing process is investigated, while various parameters affecting the drawing force are studied based on the drawing force itself. The results indicate that during the expansion process, the expansion force of the copper tube initially decreases and then increases with an increase in the cone angle of the expansion die, achieving a minimum expansion force at a die angle of 8°. In the reduction drawing process, there exists an optimal matching cone angle between the outer die and the floating core that minimizes the drawing force; specifically, when the outer die angle is 13° and the floating core angle is 11°, the drawing force is minimized. The optimal cone angle results for combined expansion and reduction drawing are consistent with those obtained from individual drawing processes. The relative errors between the theoretical analytical value and the numerical simulation value of the drawing force in the process of expanding the diameter of copper tube and reducing the diameter of the floating core are 3.7% and 6.1%, respectively.

Fields of Study & Subjects

Metal Forming Simulation Techniques Engineering Applied Research Metallurgy and Material Forming

Publication details

Journal / source
Journal of Physics Conference Series
Volume
3202
Issue
1
Pages
012064–012064
Publication date
1 March 2026
Language
EN