Rheological properties and stiffness characteristics of high modulus asphalt mastic

Read full text Summarise with VIRAT
Authors: Yanguo Cong, Chao Sun, Si Yu Peng, Huilin Meng, Lujia Li
Cited by: 0
References: 3

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Abstract To further promote the application of low-penetration grade hard high modulus asphalt, this study selects hard asphalt with penetration grades of 20 and 30 as high modulus asphalt. It investigates the rheological and stiffness properties of high modulus asphalt mastic under different filler-asphalt ratios (FAR), temperatures, and loading frequencies using dynamic shear rheometer (DSR) tests, bending beam rheometer (BBR) tests, and two-point bending stiffness modulus tests. The results show: The complex modulus increases linearly with increasing FAR. The complex modulus of the 20-grade asphalt mastic is approximately 5%-10% higher than that of the 30-grade mastic. When the FAR increases from 1.2 to 1.6, the complex modulus of the 20-grade mastic rises from 1633 MPa to 2104 MPa (an increase of 28.84%). The rutting resistance factor and fatigue resistance factor of the 20-grade mastic are superior to those of the 30-grade mastic. However, its creep stiffness (e.g., 3619 MPa for 20-grade vs. 3033 MPa for 30-grade at -5°C) is higher than that of the 30-grade mastic, indicating slightly inferior crack resistance. The stiffness modulus exhibits a negative correlation with test temperature and a positive correlation with loading frequency.

Fields of Study & Subjects

Asphalt Pavement Performance Evaluation Geotechnical and construction materials studies Petroleum Processing and Analysis

Publication details

Journal / source
Journal of Physics Conference Series
Volume
3202
Issue
1
Pages
012068–012068
Publication date
1 March 2026
Language
EN