Cryogenic UV detection using stress-engineered zero-bias ZnO-thin film based Piezo-Photonic detector

Read full text Summarise with VIRAT
Authors: P. Sau, N. Hancock, Iakovos Tzoka, Vivek Khichar, A. Barajas, G. Gansle, N. Hozhabri, V. A. Chirayath, Jonathan Asaadi
Cited by: 0
References: 24

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Abstract We demonstrate a zero-bias ultraviolet (UV) detector using Zinc Oxide (ZnO) thin films as the active semiconductor layer, specifically for application in cryogenic conditions. The zero-bias device utilizes the piezoelectric potential developed through interfacial stress in the active semiconductor layer for charge transport. Here, we explored two vertically stacked Metal-Semiconductor-Metal (MSM) configurations: Sample I, a device comprised of Chromium (Cr)/ZnO/Cr layers, and Sample II, a ZnO-Silicon Nitride ( Si 3 N 4 ) device comprised of Cr/ Si 3 N 4 /ZnO/Cr layers. The Si 3 N 4 layer in Sample II was introduced in circular regions (disks) with the aim of increasing the residual stress in the active region. These fabricated devices were tested in both room and cryogenic temperatures to characterize their UV-detection performance in a custom test-stand using a 365 nm UV LED source. We observe a higher UV-induced voltage signal for Sample II in comparison to Sample I, both in room and cryogenic temperature measurements. Our Grazing-Incidence X-Ray Diffraction (GiXRD) measurements showed approximately 40% higher residual stress in Sample II in comparison to that in Sample I. A higher residual stress possibly suggests a higher induced piezo-potential in Sample II in comparison to Sample I, which explains the enhancement in the UV-induced signal. Our results show that, through appropriate in-device stress engineering, UV photoinduced signals can be enhanced, increasing their sensitivity. A zero-bias photodetector with in-device stress engineering as demonstrated here can have applications in extreme environments, like cryogenic liquid noble elements or high radiation space environments, where low-or zero-power detection may be required.

Fields of Study & Subjects

ZnO doping and properties Ga2O3 and related materials Advanced Semiconductor Detectors and Materials

Publication details

Journal / source
Journal of Instrumentation
Volume
21
Issue
03
Pages
P03043–P03043
Publication date
1 March 2026
Language
EN