Improving the efficiency of stilling basins using geometric modifications: an experimental and numerical evaluation

Read full text Summarise with VIRAT
Authors: H. M. S. Khatlan, A. H. Kamel
Cited by: 0
References: 20

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Abstract In recent years, Iraq has been suffering from a worsening water crisis due to declining river flows and changing rainfall patterns due to climate change, which has impacted the availability and security of water resources. This reality has prompted the adoption of new strategies focused on exploiting local resources through the construction of small dams and water harvesting projects, which are an effective means of enhancing water security. However, these projects face a significant challenge: unprecedented rainfall, which generates high discharges that may exceed design limits and expose water facilities to the risk of failure. This study aimed to evaluate the performance of a Type III stilling basin at the design discharge and compare its performance with engineered models using laboratory experiments and numerical modeling. The study included four laboratory models: the standard model (Type III) and three modified models: the first relied on redistributing the baffle blocks within the basin, the second included increasing the height of the baffle blocks, and the third included adding a second row of baffle blocks. In numerical modeling, two additional configurations that had not been tested in the laboratory were simulated. The numerical simulations were conducted using ANSYS Fluent 2020 R2 with a fine mesh and the RNG k-ε turbulence model, applying appropriate boundary conditions (velocity-inlet, outflow, and wall). The first modified basin in the simulation represented a stilling basin with two rows of baffle blocks, with the height of the second row increased by 1.5×, while the second modified basin had two rows of baffle blocks with the height of both rows increased by 1.5×.The results showed that the standard basin achieved only limited energy dissipation efficiency(≈ 24%), while the two-row model achieved the best performance, reaching 42% efficiency with a clear stability of the jump position. The second model achieved an efficiency of approximately 40%, while the first model showed no significant improvement. Numerically, the models achieved efficiencies ranging from 34–36%. However, increasing the block height resulted in a fluctuating jump at Fr ≈ 4.4, which affected stability. These results confirm that the moderate modifications achieve the optimal balance between energy dissipation and jump stability, making them more suitable for practical application under climate change and the potential for extreme discharges.

Fields of Study & Subjects

Hydraulic flow and structures Dam Engineering and Safety Hydrology and Sediment Transport Processes

Publication details

Journal / source
IOP Conference Series Earth and Environmental Science
Volume
1596
Issue
1
Pages
012013–012013
Publication date
1 March 2026
Language
EN