Experimental Examination of Steel Bar Reinforcements on the Compressive Responses of Square CFST Short Columns

Read full text Summarise with VIRAT
Authors: Ayce Cathen Winti, Abdul Azim Abdullah, Abdul Razak Abdul Karim, Ahmad Beng Hong Kueh
Cited by: 0
References: 20

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Abstract Square concrete-filled steel tube (CFST) columns offer construction efficiency but are significantly more prone to local buckling and possess lower confinement compared to circular sections. While various strengthening schemes exist, they often pose fabrication challenges or compromise steel tube integrity. This study investigates the mechanical behaviour of square CFST short columns reinforced with internal steel bars attached via a spot-welding technique, designed to minimize residual stress and simplify fabrication. Five specimens were tested under axial compression to evaluate the effects of varying steel bar diameters (10 mm and 12 mm) and quantities (4, 8 or 12 bars). The configuration used in this study also differs from those in previous studies. Experimental results indicate that the reinforced specimens achieved ultimate axial loads ranging from 559.4 kN to 839.2 kN, representing a significant capacity increase of 47% to 121% over the unreinforced specimen. Furthermore, the spot-welded reinforcement enhanced ductility by up to 103% and total energy absorption by up to 217%. The findings conclude that this spot-welded internal reinforcement method is an effective, construction-friendly solution for delaying local buckling and improving the overall compressive performance of square CFST columns.

Fields of Study & Subjects

Structural Load-Bearing Analysis Structural Behavior of Reinforced Concrete Structural Response to Dynamic Loads

Publication details

Journal / source
IOP Conference Series Earth and Environmental Science
Volume
1605
Issue
1
Pages
012007–012007
Publication date
1 March 2026
Language
EN