Development of a Hermetic Gaseous Xenon Detector for Suppressing External Radon Background

Abstract Radon-induced backgrounds, particularly from $^{222}$Rn and its beta-emitting progeny, present a critical challenge for next-generation liquid xenon (LXe) detectors aimed at probing dark matter down to the neutrino fog. To address this, we developed a compact hermetic gaseous xenon (GXe) detector. This device physically isolates the active volume from external radon sources by using a PTFE vessel sealed between two quartz flanges with mechanically compressed ePTFE gaskets. To quantify the radon sealing performance, we implemented a dual-loop GXe circulation system and conducted a 670 h radon-injection measurement campaign. Radon ingress into the hermetic detector was monitored using electrostatic radon detectors and photomultiplier tubes. From these two independent measurements, the steady-state ratios of the radon concentrations inside the hermetic detector to those outside were estimated to be $(1.1 \pm 0.1) \times 10^{-2}$ and $(1.1 \pm 0.2) \times 10^{-2}$, corresponding to radon-leakage flows of $(2.9 \pm 0.3)\times 10^{-11}$ and $(2.6 \pm 0.4)\times 10^{-11}$ m$^{3}\, \mathrm{s}^{-1}$, respectively. An extrapolation to a 60 tonne LXe time projection chamber such as XLZD suggests that the radon leakage could amount to $1.2 \times 10^{-2}$ mBq, which is negligible compared to the expected natural radon emanation inside the detector, typically 3 mBq. These results demonstrate that flange-based mechanical sealing provides an effective solution for realizing radon-isolated inner detectors in large-scale LXe experiments.