Traveling-Wave Parametric Amplifier with Passive Reverse Isolation

Traveling-wave parametric amplifiers (TWPAs) have attracted much attention for their broadband amplification and near-quantum-limited noise performance. TWPAs are nonreciprocal by nature providing gain for forward-propagating signals and transmission line losses for backward traveling waves. This intrinsic nonreciprocity is insufficient to protect sensitive quantum devices from backaction due to noise from warmer amplification stages in practical systems, and requires the use of bulky cryogenic isolators. We present a multistage TWPA (mTWPA) that addresses this limitation by achieving passive in-band reverse isolation alongside near-quantum-limited noise performance. The multistage architecture consists of two mode conversion stages and a reflectionless high-pass filter that provides the passive isolation. Experimental measurements of a prototype mTWPA demonstrated 20 dB of forward gain across a 1.6 GHz bandwidth and greater than 35 dB of reverse isolation. Noise measurements indicate performance at 1.7 times the quantum limit. This demonstrates that the increased complexity of a multistage TWPA design does not lead to significant added noise. The designed distribution of gain across the stages is engineered to minimize internal amplifier noise at the input, and we propose further optimization strategies in redistribution of the gain between the stages. This level of isolation mitigates noise from warmer amplification stages, matching the performance of conventional isolators. The passive reverse isolation of the mTWPA, allows for the amplifier to operate in pulsed mode where the amplifier is off during qubit gate operations and is turned on during readout allowing for an isolator free scalable readout architecture.